Overview
If an LPR camera is moved to a new network location or its IP address changes, you can update it directly in Corvid without removing and re-adding the device.
How to Edit the IP Address
1. Navigate to Devices from the sidebar.
2. Click on the camera whose IP address needs to be updated.
3. In the camera detail panel, locate the Host field under the General configuration section.
4. Click the field to make it editable.
5. Enter the new IP address.
6. Click Apply changes to apply the change.
How to edit an LPR camera's IP address
Update the IP address for an LPR camera directly in Corvid when a device moves to a new network location — no need to remove and re-add the camera.